LCD/LED Controller Board Kit HDMI+VGA+2AV for 15.6 Display N156HGE-L11 1920x1080

LCD/LED Controller Board Kit HDMI+VGA+2AV for 15.6 Display N156HGE-L11 1920x1080
LCD/LED Controller Board Kit HDMI+VGA+2AV for 15.6 Display N156HGE-L11 1920x1080 LCD/LED Controller Board Kit HDMI+VGA+2AV for 15.6 Display N156HGE-L11 1920x1080 LCD/LED Controller Board Kit HDMI+VGA+2AV for 15.6 Display N156HGE-L11 1920x1080 LCD/LED Controller Board Kit HDMI+VGA+2AV for 15.6 Display N156HGE-L11 1920x1080 LCD/LED Controller Board Kit HDMI+VGA+2AV for 15.6 Display N156HGE-L11 1920x1080
Product Code: RTD2660 LED Kit-2
Reward Points: 0
Availability: In Stock
Price: $32.99
   - OR -   
PCB800099 LCD/LED Controller Driver Board Kit

Not: Please tell us the LCD panel model number when you purchase this item. Thank you very much!

  • Please scroll down for product instruction and wiring schematic.
  • How to combine multiorders into one shipment:
  • Step1. pick up the item by clicking "ADD TO CART".
  • Step2. After you get all the items you want to buy into the "SHIPING CART", click "PROCEED TO CHECK OUT" and follow the instruction to complete the order.
  • The driver board can
  • 1.1-way VGA signal input
  • 2.2 road AV signal input
  • 3.1-way HDMI signal input and support of the IC is HDMI1.1
  • 4.1-way reversing signal input
  • 5.support wide voltage input, and can work normally between 5V-24V
  • 6.the standard backlit 6PIN, interface, external pressure plate
  • 7.integrated LCD driver board LED backlight driver board road
  • 8.standard LVDS signal output, can support a single 6, 8 single, dual 6, 8, etc. LCD screen double standard LVDS signal, but only supports screen LCD supply of 3.3V
  • 9.standard key board interface, and supports dual-color LED display
  • 10.support TTL signal output,Support AT070TN92,AT065TN14,AT080TN52,AT090TN12,AT090TN10 ,AT070TN90,AT070TN93 AT070TN94 so common 50 PIN TTL LCD interface
  • 11.The maximum output of the display driver board resolution, 1920X1080 over, 1440X900 display resolution when needed, as the work of the IC, increasing the heat sink to reduce the IC's operating temperature)
  • 12.The IC, VGA YPBPR signal input section can be directly through the program
  • 13.The driver board can increase the remote control function (through software)
  • 14.Support for reversing control, and display on the AV2, reversing the voltage input 50V voltage support within
  • 15.The drive plate positioning holes for the four
  • This is a great set of easy-reassembling LCD controller kit which is used to turn a bare LCD panel into a desktop/PC monitor. It will be a surprise that your bare LCD will be of good use, and no longer be a waste. Or it is a very insteresting things that we make a monitor successfully by ourselves. It supports most of the LCD panel from 12.1" to 55" with a LVDS interface and a resolution lower than 2048X1152, plug&play kit, no need soldering.
  • Notice: Please remember to leave us your LCD Model Number before placing the order, it is very import for us to prepare the right kit for you.
  • How to find a right lcd model number Please check the following picture. They are LP171WU5(TL)(B1),LM201U04 (A3)(K6), LM170E01(TL)(BB) and N133BGE-LB1. Their sizes are 17.1″,20.1″, 17″ and 13.3″.
 

 

 
  • Beside this kit, you will need to prepare the VGA cable/DVI cable/HDMI cable and power adapter yourself. If you need the power adapter, please contact us.
  • Since different inverter board depends on your LCD panel model, and we may update the controller board a little bit, the kits you would receive may not exactly the same as pictured, please note!
 
  • CONFIGURATION & GENERAL PRECAUTIONS
  • Relative humidity: 80%.
  • Storage temperature: -10~+60 °C.
  • Operation temperature: 0~+40 °C.
  • Protect the control board from static; it may cause damage to the IC.
  • Disconnect the TV before the power supply of panel is connected correctly.
  • Do not drop any metal on the control board when it is working.
  • Do not push or pull the connector when the control board is working.
  • Do not disassemble the module. If the surface or the control board is dirty, clean it with soft dry cloth.
  • Can’t be pressed and distorted. 
  • Note:
  • This controller board support Automatically Switch to AV2(Reversing View camera). Please connected ACC to 12V. 
  • PCB800099 LCD/LED Controller Board  x1
  • IR Remote Control             x1
  • 5-key keypad                x1
  • LVDS Cables                 x1

 

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:



Powered By NYPlatform
NY Platform © 2018