LCD Controller Kit Driver LVDS Inverter DVI VGA for Samsung LTN150P2 SXGA+

LCD Controller Kit Driver LVDS Inverter DVI VGA for Samsung LTN150P2 SXGA+
LCD Controller Kit Driver LVDS Inverter DVI VGA for Samsung LTN150P2 SXGA+ LCD Controller Kit Driver LVDS Inverter DVI VGA for Samsung LTN150P2 SXGA+ LCD Controller Kit Driver LVDS Inverter DVI VGA for Samsung LTN150P2 SXGA+ LCD Controller Kit Driver LVDS Inverter DVI VGA for Samsung LTN150P2 SXGA+ LCD Controller Kit Driver LVDS Inverter DVI VGA for Samsung LTN150P2 SXGA+ LCD Controller Kit Driver LVDS Inverter DVI VGA for Samsung LTN150P2 SXGA+
Product Code: RTD2261 LP150P2 Kit
Reward Points: 0
Availability: In Stock
Price: $31.00
   - OR -   
LCD Controller Board Kit RTD2261

PLEASE READ THIS CAREFULLY BERFORE YOU ORDER THE KIT:

  • Please make sure the vertical and horizontal driver inside your LCD is still work, If it does not work our kit can not fix it.
  • The driving circuit of LCD (marked as " 1" in following figure), The back light lamp(marked as"2")
  • Please remember to leave us your LCD Model Number before placing the order, it is very import for us to prepare the right kit for you. How to find a right lcd model number Please check the following picture. They are LP171WU5(TL)(B1),LM201U04 (A3)(K6), LM170E01(TL)(BB) and N133BGE-LB1. Their sizes are 17.1″,20.1″, 17″ and 13.3″.
 
 
  • Beside this kit, you will need to prepare the VGA cable/DVI cable/HDMI cable and power adapter yourself. If you need the power adapter, please buy eBay item number:151314226569
  • Because different LCD need different driver and working voltage,after you received the kit, please do not change any jumpers on the board, or use the kir for other LCD with different model number, otherwise you may damage your LCD. If you have any question or wantto use the kit for other LCD panel, please contact with us.
  • Since different inverter board depends on your LCD panel model, and we may update the controller board a little bit, the kits you would receive may not exactly the same as pictured, please note!
  • RTD2261 LCD Controller Board   x1
  • CCFL Inverter             x1
  • LVDS Cable FIX-30P-S6        x1
  • 5-Keys Keypad             x1
HOW TO CONNECT THE KIT
  • Remove all circuit boards from the monitor.
  • Connect CCFL inverter, Connect the inverter to the monitor backlight socket: you may put any plug into any socket, no perticular order requested.
 
  • Connect control panel as the following figure.
 
  • Connect 12VDC power to the board for LCD CCFL backlight lamp test, if the LCD panel lit up, it means the backlight of the LCD is working, then you can turn off the power and connect other wires. If the LCD does not lit up, then the backlight is brocken, you need to replace the lamps.
  • ATTENTION:The high voltage strip has a output protection circuit,you have to connect all the wires properly and make sure the backlight is working, otherwis it will not work. If you only need to test the lamp, you can buy a high voltage strip specially for single lamp witheBay item number:151320009442
 
  • turn the power off,Harness connection: Match the mark on the harness pinhead with the pin #1 Mark on the board, (ATTENTION:Reverse connection may burn the screen).
 
  • Pay attention to the pinhead see if it is match up with the LVDS pinhead, watch the LVDS test points(those red circles in the picture), see if the number of circled point is same as the number of wires in blue /white, if you have any question please contact with us.
 
  • The completed connnection:
  • Connect VGA signal, turn on DC12 power, test the monior.
 

 

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:



Powered By NYPlatform
NY Platform © 2018