APM 2.8 & NEO-6M GPS & Power Module & Shock Absorber & MinimOSD & GPS Stand

APM 2.8 & NEO-6M GPS & Power Module & Shock Absorber & MinimOSD & GPS Stand
APM 2.8 & NEO-6M GPS & Power Module & Shock Absorber & MinimOSD & GPS Stand APM 2.8 & NEO-6M GPS & Power Module & Shock Absorber & MinimOSD & GPS Stand APM 2.8 & NEO-6M GPS & Power Module & Shock Absorber & MinimOSD & GPS Stand APM 2.8 & NEO-6M GPS & Power Module & Shock Absorber & MinimOSD & GPS Stand APM 2.8 & NEO-6M GPS & Power Module & Shock Absorber & MinimOSD & GPS Stand APM 2.8 & NEO-6M GPS & Power Module & Shock Absorber & MinimOSD & GPS Stand APM 2.8 & NEO-6M GPS & Power Module & Shock Absorber & MinimOSD & GPS Stand
Product Code: (5.2)APM2.8-KIT5
Reward Points: 0
Availability: In Stock
Price: $76.86
   - OR -   

APM 2.8 & NEO-6M GPS & Power Module & Shock Absorber & MinimOSD & GPS Stand

  • Please scroll down for product instruction and wiring schematic.
  • How to combine multiorders into one shipment;
  • Step1. Pick up the item by clicking "ADD TO CART".
  • Step2. After you get all the items you want to buy into the "SHIPING CART",click"PROCEED TO CHECK OUT"and follow the instruction to complete the order. 

floatingWe provide 30 days money back on non-defective, undamaged products. Restocking fee and other fee may apply upon the condition of returned products. Shipping and handling fees are non-refundable.

*** 100% GUARANTEE ***
30 Days Money Back 
* FREE SHIPPING *
USPS First Class Package
Shipped to U.S. Address
  • Features:
  • Introduction:
    This is the new APM 2.8 autopilot module. The sensors are exactly the same as with APM2.6, however this version have an onboard compass, which makes this version ideal for use with multicopters and rovers.
    Features :
    Arduino Compatible
    Includes 3-axis gyro, accelerometer and magnetometer, along with a high-performance barometer
    Onboard 4 MegaByte Dataflash chip for automatic datalogging
    Optional off-board GPS, uBlox LEA-6H module with Compass.
    One of the first open source autopilot systems to use Invensense's 6 DoF Accelerometer/Gyro MPU-6000.
    Barometric pressure sensor upgraded to MS5611-01BA03, from Measurement Specialties.
    Atmel's ATMEGA2560 and ATMEGA32U-2 chips for processing and usb functions respectively.
  • GPS Features:
    - Built-in compass GPS module
    - Main chip: Ublox-6M
    - With fast satellite searching speed and high precision
    - Compatible with APM serial port and I2C port
    - Includes round plastic shell and GPS support
  • MAVLink-OSD V2.0
  • Introduction:
    - MAVLink-OSD is an Arduino based project and it is fully compatible with original MinimOSD.
    - This board can be used for CRIUS AIOP and Arduflyer / ArduPilot-Mega.
    - MAVLink-OSD with switching DC/DC stepdown powersupply to maximize efficiency on power system. No more heating problems when using this OSD board.
    - Default OSD Firmware is MinimOSD-Extra, written by Gábor Zoltán.
    - About how to use the configurator tool to setup OSD function: Click here
    - How to setup hardware (original MinimOSD Wiki): click here
    Power Module is a simple way of providing your APM/Arduflyer with clean power from a LiPo battery as well as current consumption and battery voltage measurements, all through a 6P cable. The on-board switching regulator outputs 5.3V and a maximum of 3A from up to a 7S LiPo battery.
    Note: The Power Module is only designed to power APM/Arduflyer, a RC receiver and accessories (GPS, Radio telemetry). It is not designed to power servos. Use your aircraft's own ESC/BEC for that.
  • Hardware Features:
    - ATMEGA328P Microcontroller
    - MAX7456-EUI monochrome on-screen display
    - 5V/500mA DC/DC regulator for MAX7456-EUI
    - Operating voltage: 5V(FTDI connector) and 12V(Video I/O connector)
    - Supported NTSC & PAL
    - FTDI connector
  • Software features:
    - Full MAVLink protocol support
    - Graphical configurator tool
  • APM Arduflyer Power Module V1.0
  • Introduction:
    Power Module is a simple way of providing your APM/Arduflyer with clean power from a LiPo battery as well as current consumption and battery voltage measurements, all through a 6P cable. The on-board switching regulator outputs 5.3V and a maximum of 3A from up to a 7S LiPo battery.
    Note: The Power Module is only designed to power APM/Arduflyer, a RC receiver and accessories (GPS, Radio telemetry).It is not designed to power servos. Use your aircraft's own ESC/BEC for that.
  • Features:
    - Max input voltage: 30V
    - Max current sensing: 90A
    - Voltage and current measurement configured for 5V ADC
    - Switching regulator outputs 5.3V and 3A max
    - 6P molex cable plugs directly to APM/Arduflyer 2.5's 'PM' connector
  • APM2.8 Board + Shock Absorber x1
  • Neo-6M GPS module x1
  • MAVLink-OSD V2.0 x1
  • Power Module x1
  • GPS Bracket x1

 

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:



Powered By NYPlatform
NY Platform © 2018